Thermal/Traffic-aware 3D Network-on-Chip (NoC) Designs
Abstract: Three-dimensional Network-on-Chip (3D NoC), the combination of NoC and 3D IC technology, can achieve lower latency, lower power consumption, and higher data bandwidth for efficient intra/inter-chip data exchange of chip multiprocessors (CMPs). However, due to die stacking in 3D IC, both heat conduction path and power density increase. It has been shown that NoC operations have comparable thermal impact as processing units, and significantly contributes to overall chip temperature. Besides, busy routers are prone to be overheating hotspots, which lead to the vulnerability of performance and reliability of NoC. To ensure thermal safety while avoiding huge performance degradation from the temperature constraint, several new design methodologies based on smart routing schemes and proactive thermal management for thermal- /traffic-aware 3D NoC designs will be presented in this talk.
An-Yeu (Andy) Wu (IEEE M’96-SM’12-F’15) received the B.S. degree from National
Taiwan University in 1987, and the M.S. and Ph.D. degrees from the University of
Maryland, College Park in 1992 and 1995, respectively, all in Electrical Engineering.
From August 1995 to July 1996, he was a Member of Technical Staff (MTS) at AT&T
Bell Laboratories, Murray Hill, NJ, working on high-speed transmission IC designs. From
1996 to July 2000, he was with the Electrical Engineering Department of National Central
University, Taiwan. In August 2000, he joined the faculty of the Department of Electrical
Engineering and the Graduate Institute of Electronics Engineering, National Taiwan
University (NTU), where he is currently a Professor. His research interests
include low-power/high-performance VLSI architectures for DSP and communication applications,
adaptive/multirate signal processing, reconfigurable broadband access systems and
architectures, bio-medical signal processing, and System-on-Chip (SoC)/Network-on-Chip (NoC) platform for software/hardware co-design.
He has published more than 190 refereed journal and conference papers in above research areas, together with five book
chapters and 16 granted US patents.
Dr. Wu is now serving an Associate Editor for JOURNAL of SIGNAL PROCESSING
SYSTEMS (JSPS), and had served as Associate Editor for many leading IEEE journals in
circuits and signal processing areas, such as the IEEE TRANSACTIONS ON SIGNAL
PROCESSING, the IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS—PART I,
the IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS—PART II, and the IEEE
TRANSACTIONS ON VERY LARGE SCALE INTEGRATION (VLSI) SYSTEMS. He
acted as the Lead Guest Editor of the special issue of “2010 IEEE Workshop on Signal
Processing Systems (SiPS) in JSPS (published in Nov. 2011), and the special issue of
“Signal Processing for Broadband Access Systems: Techniques and Implementations,” in
EURASIP Journal on Applied Signal Processing (published in December 2003). He also
acted as the Guest Editor of a special issue of “Low-Power, Reliable, and Secure
Solutions for Realization of Internet of Things,” in IEEE Journal on Emerging and
Selected Topics in Circuits and Systems (published in March 2013). He also served on the
technical program committees of many major IEEE International Conferences, such as
ISCAS, ICASSP, SiPS A-SSCC, AP-ASIC, SOCC, and ISPACS. Prof. Wu served as the
General Co-Chair of 2013 International Symposium on VLSI Design, Automation& Test
(VLSI-DAT), and 2013 IEEE Workshop on Signal Processing Systems (SiPS). He also
served as Technical Program Co-Chair of 2014 International SoC Design Conference
(ISOCC) and 2014 IEEE Asia Pacific Conference on Circuits and Systems (APCCAS).
From 2012 to 2014, he served as the Chair of VLSI Systems and Applications (VSA)
Technical Committee (TC), one of the largest TCs in IEEE Circuits and Systems (CAS)
Society.
From August 2007 to Dec. 2009, he was on leave from NTU and served as the Deputy
General Director of SoC Technology Center (STC), Industrial Technology Research
Institute (ITRI), Hsinchu, TAIWAN, supervising WiMAX, Parallel Core Architecture
(PAC) VLIW DSP Processor, and Android-based Multicore SoC platform projects. From
2012 to 2013, Dr. Wu served as the Deputy Director of Graduate Institute of Electronics
Engineering (GIEE) of National Taiwan University. Since March 2014, Dr. Wu is in
charge of the overall talent cultivation program in National Program for Intelligent
Electronics (NPIE), under sponsorship of Ministry of Education in Taiwan.
Dr. Wu received numerous awards for his technical achievements and academic society
services, including 2010 Outstanding EE Professor Award from The Chinese Institute of
Electrical Engineering (CIEE), Taiwan, two Best Paper Awards in 2014 and 2010
International Symposium on VLSI Design, Automation and Test (VLSI-DAT), Excellent
Patent Award from Industrial Technology Research Institute (ITRI) in 2009, Teaching
Award of Common Education Course, National Taiwan University in 2007, Dr. Wu Ta-you
Award (Young Investigator Award) from National Science Council (NSC), Taiwan (the
only nominee from Microelectronics research group of the NSC) in 2005, Distinguished
Young Engineer Award from The Chinese Institute of Electrical Engineering (CIEE) in
2004, Best Engineering Paper Award, from the Chinese Institute of Engineers (CIE),
Taiwan in 2004, and Young Chair Professor Award from Macronix International
Corporation (MXIC) Education Foundation in 2003. In 2015, Prof. Wu is elevated to
IEEE Fellow for his contributions to “DSP algorithms and VLSI designs for
communication IC/SoC.”
Designs of high-frequency and high-efficiency amplifiers
-Applications of computation algorithm of bifurcation analyses to amplifier designs
Abstract:
High-frequency and high-efficiency power amplifiers have important
roles of many applications such as dc-ac inverter of resonant
amplifier, transmitter part of wireless power transfer, RF power
source, and so on. Soft switching techniques are necessary for
achieving high power conversion efficiency at high frequencies. It is,
however, not easy to design for satisfying the soft switching
conditions.
By the way, switching converters are typical nonlinear systems with
external force. Therefore, the power-electronics research filed is
very familiar with nonlinear-system analysis research field. Actually,
many instability analyses of power converters have been carried out by
using analytical techniques developed by the nonlinear-system analysis
research fields. In other words, switching converters are regarded as
concrete objects of nonlinear-system analyses. It is my claim that
nonlinear-system analysis techniques should be used not only
instability analyses but also designs of power converters more
actively.
This talk presents the principle operations of high-frequency and
high-efficiency power amplifiers and the design method based on
computation algorithm of bifurcation analyses. Design examples and
measurement results are also shown.
Biography:
Hiroo Sekiya received the B.E., M.E., and Ph. D. degrees in electrical
engineering from Keio University, Yokohama, Japan, in 1996, 1998, and
2001 respectively.
Since April 2001, he has been with Chiba University and now he is an
Associate Professor at Graduate School of Advanced Integration
Science, Chiba University, Chiba, Japan. From Feb. 2008 to Feb. 2010,
he was with Electrical Engineering, Wright State University, Ohio, USA
as a visitng scholar.
His research interests include high-frequency high-efficiency tuned
power amplifiers, resonant dc/dc power converters, dc/ac inverters,
magnetic component designs, and digital signal processing for wireless
communications.
Dr. Sekiya received 2008 Funai Information and Science Award for Young
Scientist, 008 hiroshi Ando Memorial Young Engineering Award, and
Erricson Young Scientist Award 2008. He served chairs of IEEE CASS
NCAS-TC(2013) and PECAS TC(2014) and organizing committees of many
international conferences.
He is a senior member of IEEE and IEICE, Japan.